Language
soso
Homepage
/
Products
/
Aluminum Fins Production Line

Aluminum Fins Production Line

1. Break through the previous concept and adopt new fin stamping processing methods 2. Compared with previous production lines, it saves more space does not require large-scale infrastructure. Freedom to set up 3. Shorten mold setting time 4. High-speed precision punching machine with full dynamic balance device 5. The pursuit of high precision, with a high-speed feeder
零售价
0.0
￥
市场价
0.0
￥
浏览量:
1000
Product Model:
Category:
Products
数量
-
+
库存:
0
Keywords:
Aluminum Fins Production Line
1
Feedback
Description
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

热交换器（铝制翅片）制造线Features:

1. Break through the previous concept and adopt new fin stamping processing methods
2. Compared with previous production lines, it saves more space
does not require large-scale infrastructure. Freedom to set up
3. Shorten mold setting time
4. High-speed precision punching machine with full dynamic balance device
5. The pursuit of high precision, with a high-speed feeder

 

 

 

 

 

 

 

 

 

热交换器（铝制翅片）制造线

 

Specifications:

Punch

Type Pressure capacity
kN		 Stroke length
mm		 Number of strokes
spm		 Mould height (adjustment amount)
mm(mm)		 Work table size
RLmm x FBmm x tmm
MAP-30 300 20~40 150~600 260~270(50) 700×640 x 90


Feeder

Type Structure tooth pitch material width Kehou Feeding tray
Pull feeder Mechanical type any 400 0.1 UCT-100


Splicer (⒉ Connected/4 Connected Rotation)

Material width weight bearing Material roll diameter (inner×outer) Feeding speed Pressure size adjustment×rotation
400mm 130Okg×2 volumes 150±3×130Omm 24m/min Air pressure adjustment/manual adjustment

 

 

 

扫二维码用手机看
未找到相应参数组，请于后台属性模板中添加
Previous
Toggle type high speed precision punch (adjustable stroke)
Next
High-Speed, High Precision Press

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码

More Products

Super high speed servo punch
Super high speed servo punch
1. Compact design The punch press with the same production capacity in the past has reduced the size of the punch by one third 2. Forming from a good stamping product 3000spm can also be stamped into good products at one time 3. Excellent operating performance Manual cranking is possible in standard mode Reduce preparation time according to the servo drive * 3000spm continuous processing, spm50 inch movement can be set instantaneously 4. The final achievable accuracy Flatness: 1μm「JIS special grade 12μm」 Parallelism: 2um「JIS special grade 14um」 Verticality: 0.4μm「JIS special grade 8μm」 Data of ALT-3 5. Environmental protection type punch Power consumption: save 70% CO2 emissions: reduced by 70%, fuel consumption: reduced by 60%. *Comparison between OMEGA-F1 and ALT-3- 6. Easier to change settings
Next Generation BDC Control Intelligent Press
Next Generation BDC Control Intelligent Press
1. More subtle control than artificial intelligence, can achieve high precision when used all over the world, and automatically control thermal displacement 2. Bottom dead center position recording function (optional) 3. Visual fine control, direct measurement of product portrait, feedback of bottom dead center control (optional)- 4. The variable stroke mechanism can set the stroke length according to the processing method and widen the worktable (i-MX45XL, i-MX50XL) 5. Outstanding operability, large touch screen, automatic setting function 6. Integrated soundproof speaker (optional)
The Straight Side Press
The Straight Side Press
General-purpose high-precision best-selling model 1. High-performance, high-cost punch 2. Dual-axis 8-sided slider long guide 3. The slider is a high-rigidity box structure 4. High-rigidity one-piece casting bed 5. High torque clutch & brake 　　 Dry clutch & brake plate 6. Wide table size 　　 can be applied to larger molds
Precision Cold Forging Progressive Press
Precision Cold Forging Progressive Press
1. Ultra-high rigid main frame 　　Comprehensive clearance and bending amount are less than 1/4 of the conventional cold forging press 2. 10mm above the bottom dead center reaches the maximum stamping capacity 　　*MVP-300 3, 4 guide pillars 2 plunger guide structure 4. Variable stroke type 　　* MVP-600 5. Conversion from cutting to stamping 6. Reasonable toggle movements 　　 Stop motion within 60° of bottom dead center
High-Speed, High Precision Press
High-Speed, High Precision Press
High-speed precision best-selling models with actual sales of more than 1,000 units 1. It can correspond to various production and processing methods, such as processing terminals, IC lead frames, motor cores, chains, and washers. 2. High precision machining with four guide columns and two plungers (220L, 220TL. 330L is a 3 plunger type) 3. High rigidity thickened main frame 4. Adopt linear bearing to guide 5. Ensure excellent bottom dead center accuracy (cold & hot constant temperature device is standard) 6. A variety of additional options are available
Ultra High Speed High Precision Press
Ultra High Speed High Precision Press
Challenge the speed of light 1. Achieve the world's highest speed 4000SPM (F1HS) 2. Using light material slider to make the bottom dead center accuracy stable The slider uses a special alloy, (High-speed machine tool adopts standard slider material configuration) 3. Use special fluid bearings No contact with metals, control shaking resistance 4. Using piston pin method Minimize the comprehensive clearance, support high eccentric load 5. Standard dynamic balancer Low vibration even when running at high speed
Ultra-high speed crankshaft precision punch
Ultra-high speed crankshaft precision punch
1. Super large worktable, which can be used for 2300mm large die stamping processing 2, 4 guide posts 3 plunger structure can resist high eccentric load * a-80, 125, 125L201I, EPS-80 are 2 plungers 3. Achieve the highest number of revolutions 4. It can achieve the precise dynamic accuracy that can be achieved by small precision punches. 5. The high rigid frame structure can resist high eccentric load. 6. The large swing control device developed by our company can be used for 1500spm
3D Precision Stamping Press
3D Precision Stamping Press
1. Toggle structure 4 guide post 2 plunger guide punch 2. Automatic setting device Reduced preparation time Stroke length·Stroke speed·Die height·Feeding length·Release angle Feeding line height (optional setting) 3. The slider stroke can be adjusted to correspond to various processing 4. The main frame of the machine tool with high rigidity Slider frame: high rigid frame FCD50 Workbench S45C 5. Reduce noise and vibration Reduce stamping skipping and extend die life
Toggle type high speed precision punch (adjustable stroke)
Toggle type high speed precision punch (adjustable stroke)
1. High bottom dead center accuracy 2. The highest number of revolutions MXM-20HSL:2500SPM 3. Design of cold and hot constant temperature Stable bottom dead center during continuous operation 4. Reduce noise and vibration to extend the life of the mold 5. Large screen operation touch screen / with automatic setting device 6. A wider worktable can be applied to large molds

ADD.:

Wangkeng Road, Matigang, Dalingshan, Dongguan City, Guangdong Province, China

FAX:

+86-769-82868446

分享

Time of issue:2021-06-30 15:01:23

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

搜索
Search