Language
soso
Homepage
/
News
/
Industry Trends
/
What is the general difference in the stamping stroke of a high-speed punch?

What is the general difference in the stamping stroke of a high-speed punch?

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2021-07-03 13:24
  • Views:

(Summary description)A 10-ton punch is only a tonnage, which is one of the parameters of a punch. The punch presses with different precisions and different forms produced by different manufacturers are different, and there are many differences. There is no standard. Depending on the design of the punch manufacturer, it is mainly the eccentricity of the drive crankshaft driven by the flywheel. If it is H, then the stroke of the punch is 2H (highest to lowest). Some manufacturers of high-precision high-speed punching presses will also provide according to customer needs, such as stroke 15mm 20mm 25mm 30mm and other specifications, the tonnage can be the same level tonnage.

What is the general difference in the stamping stroke of a high-speed punch?

What is the general difference in the stamping stroke of a high-speed punch?

What is the general difference in the stamping stroke of a high-speed punch?

What is the general difference in the stamping stroke of a high-speed punch?

(Summary description)A 10-ton punch is only a tonnage, which is one of the parameters of a punch. The punch presses with different precisions and different forms produced by different manufacturers are different, and there are many differences. There is no standard. Depending on the design of the punch manufacturer, it is mainly the eccentricity of the drive crankshaft driven by the flywheel. If it is H, then the stroke of the punch is 2H (highest to lowest). Some manufacturers of high-precision high-speed punching presses will also provide according to customer needs, such as stroke 15mm 20mm 25mm 30mm and other specifications, the tonnage can be the same level tonnage.

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2021-07-03 13:24
  • Views:
Information

A 10-ton punch is only a tonnage, which is one of the parameters of a punch. The punch presses with different precisions and different forms produced by different manufacturers are different, and there are many differences. There is no standard. Depending on the design of the punch manufacturer, it is mainly the eccentricity of the drive crankshaft driven by the flywheel. If it is H, then the stroke of the punch is 2H (highest to lowest). Some manufacturers of high-precision high-speed punching presses will also provide according to customer needs, such as stroke 15mm 20mm 25mm 30mm and other specifications, the tonnage can be the same level tonnage.

Previous: Private enterprises have accounted for half of the machine tool industry
Next: Analysis of my country's CNC Machine Tool Market Demand During the Twelfth Five-Year Plan
Previous: Private enterprises have accounted for half of the machine tool industry
Next: Analysis of my country's CNC Machine Tool Market Demand During the Twelfth Five-Year Plan

More Information

How to operate the high speed punch [ 2023-07-13 ]
High-speed presses have two kinds of open presses and closed presses, and their continuous stamping speed is more than 100 times, (small and medium-sized tonnage can currently reach 800-1000 times). The operation of high-speed punching machine need to pay attention to the following matters: 1, high-speed punching machine must not appear oil cut-off phenomenon, due to the fast rush, the movement of the heat, generally take thin oil circulation lubrication, oil cut-off is easy to cause stuffy car failure; 2, no overload use, the load of high-speed punching machine can not be as short time overload problem as conventional punching machine, high-speed punching machine general load is recommended to use about 50-70% of the nominal force to ensure the stiffness of the fuselage; 3, high-speed punching is not recommended to use a single stamping, high-speed punching machine with a single stamping will lose the significance and efficiency of high-speed punching, and a single operation braking Angle is large, the upper dead point is not easy to stop; 4, the high-speed punching machine supporting the unwinding, leveling, feeding device to match the punch speed of the punching machine, can not be mistakenly sent or feed is not timely card phenomenon, in the mold debugging to work more to solve; 5, high-speed punching machine waste collection should be timely. Normal operation, boot lubrication, start the motor, after normal operation (some high-speed presses may warm the machine), and then operate stamping.
Ultra-high speed crankshaft precision punch-Dongguan Sichuang [ 2023-03-18 ]
1. Super large worktable, which can be used for 2300mm large die stamping processing 2, 4 guide posts 3 plunger structure can resist high eccentric load * a-80, 125, 125L201I, EPS-80 are 2 plungers 3. Achieve the highest number of revolutions 4. It can achieve the precise dynamic accuracy that can be achieved by small precision punches. 5. The high rigid frame structure can resist high eccentric load. 6. The large swing control device developed by our company can be used for 1500spm
High-Speed, High Precision Press [ 2022-08-01 ]
High-speed precision best-selling models with actual sales of more than 3000 units 1. It can correspond to a variety of production and processing methods Terminals, IC lead frames, motor cores, chains, washers, etc. processing 2. Four guide pillars and two plungers guide high-precision machining (220L, 220TL, 330L are 3 plunger types) 3. High rigidity thickened main frame 4. Adopt linear bearing to guide 5. Ensure excellent bottom dead center accuracy (Standard cold & hot thermostat device) 6. A variety of additional options are available   Dongguan Sichuang Precision Machinery Co., Ltd. is located in Dalingshan Town, Dongguan City, Guangdong Province. It is a professional agent for Yamada Punch from Japan.
Dongguan Si Chuang Precision, YAMADADOBBY high-speed punch [ 2022-07-05 ]
Dongguan Si Chuang Precision operates Yamada punch, YAMADADOBBY high-speed punch, KYORI punch, Japanese high-speed punch, YAMADA DOBBY and so on. In order to achieve the ultimate punching accuracy, our company is equipped with micron-precision machining equipment, and integrates the processing, assembly and design of our company for R&D and production. The company now has the world's high-speed high-speed punch, 2-micron precision intelligent punch, and provides automatic riveting production lines for motor cores and other machinery.
Ultra-high-speed servo punch [ 2022-01-20 ]
1. Compact design A punch press with the same production capacity as before, one-third smaller 2. Forming from one stamping good product 3000spm can also be stamped and formed at one time 3. Excellent operating performance Manual cranking is possible in standard mode Reduced setup time due to servo drive * 3000spm continuous processing, spm50 inch can be set instantaneously 4. The ultimate accuracy Flatness: 1μm "JIS Premium 12μm" Parallelism: 2um "JIS Premium 14um" Verticality: 0.4μm "JIS Premium 8μm" Apply for ALT-3 data 5. Environmentally friendly punch

ADD.:

Wangkeng Road, Matigang, Dalingshan, Dongguan City, Guangdong Province, China

FAX:

+86-769-82868446

分享

Time of issue:2021-06-30 15:01:23

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

搜索
Search