Language
soso
Homepage
/
News
/
Company News
/
How to operate a high-speed punch?

How to operate a high-speed punch?

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-07-01 16:27
  • Views:

(Summary description)There are two types of high-speed punches: open punch and closed punch. The continuous punching speed is more than 100 times (currently about 800-1000 times for small and medium tonnage). The matters needing attention when operating high-speed punching machine are: 1. The high-speed punching machine must not have oil cut off. Because of the fast punching times and the high heat of the moving parts, the thin oil circulation lubrication method is generally adopted, and the oil cut off is very easy to cause the stuffy car failure;

How to operate a high-speed punch?

How to operate a high-speed punch?

How to operate a high-speed punch?

How to operate a high-speed punch?

(Summary description)There are two types of high-speed punches: open punch and closed punch. The continuous punching speed is more than 100 times (currently about 800-1000 times for small and medium tonnage).
The matters needing attention when operating high-speed punching machine are:
1. The high-speed punching machine must not have oil cut off. Because of the fast punching times and the high heat of the moving parts, the thin oil circulation lubrication method is generally adopted, and the oil cut off is very easy to cause the stuffy car failure;

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-07-01 16:27
  • Views:
Information
There are two types of high-speed punches: open punch and closed punch. The continuous punching speed is more than 100 times (currently about 800-1000 times for small and medium tonnage).
 
The matters needing attention when operating high-speed punching machine are:
 
1. The high-speed punching machine must not have oil cut off. Because of the fast punching times and the high heat of the moving parts, the thin oil circulation lubrication method is generally adopted, and the oil cut off is very easy to cause the stuffy car failure;
 
2. Do not use with overload. The load of high-speed punches cannot be as short-term as conventional punches. The problem of short-term overload is not big. The general load of high-speed punches is recommended to be used at about 50-70% of the nominal force to ensure the rigidity of the machine body;
 
3. It is not recommended to use a single punch for high-speed punching. A single punching for a high-speed punch will lose the meaning and efficiency of high-speed punching, and the braking angle is large in a single operation, and the top dead center is not easy to stop;
 
4. The uncoiling, leveling, and feeding devices of the high-speed punch must match the punching speed of the punch, and there must be no misfeeding or delayed feeding jams, and more work should be done to solve the problem when the mold is debugged;
 
5. The waste collection of high-speed punches should be timely. In normal operation, start lubricating and refueling, start the motor, and after normal operation (some high-speed punching machines may need to be warmed up), then operate the stamping.
Previous: Private enterprises have accounted for half of the machine tool industry
Next: What is the difference between a high-speed punch and a punch
Previous: Private enterprises have accounted for half of the machine tool industry
Next: What is the difference between a high-speed punch and a punch

More Information

How to operate the high speed punch [ 2023-07-13 ]
High-speed presses have two kinds of open presses and closed presses, and their continuous stamping speed is more than 100 times, (small and medium-sized tonnage can currently reach 800-1000 times). The operation of high-speed punching machine need to pay attention to the following matters: 1, high-speed punching machine must not appear oil cut-off phenomenon, due to the fast rush, the movement of the heat, generally take thin oil circulation lubrication, oil cut-off is easy to cause stuffy car failure; 2, no overload use, the load of high-speed punching machine can not be as short time overload problem as conventional punching machine, high-speed punching machine general load is recommended to use about 50-70% of the nominal force to ensure the stiffness of the fuselage; 3, high-speed punching is not recommended to use a single stamping, high-speed punching machine with a single stamping will lose the significance and efficiency of high-speed punching, and a single operation braking Angle is large, the upper dead point is not easy to stop; 4, the high-speed punching machine supporting the unwinding, leveling, feeding device to match the punch speed of the punching machine, can not be mistakenly sent or feed is not timely card phenomenon, in the mold debugging to work more to solve; 5, high-speed punching machine waste collection should be timely. Normal operation, boot lubrication, start the motor, after normal operation (some high-speed presses may warm the machine), and then operate stamping.
Ultra-high speed crankshaft precision punch-Dongguan Sichuang [ 2023-03-18 ]
1. Super large worktable, which can be used for 2300mm large die stamping processing 2, 4 guide posts 3 plunger structure can resist high eccentric load * a-80, 125, 125L201I, EPS-80 are 2 plungers 3. Achieve the highest number of revolutions 4. It can achieve the precise dynamic accuracy that can be achieved by small precision punches. 5. The high rigid frame structure can resist high eccentric load. 6. The large swing control device developed by our company can be used for 1500spm
High-Speed, High Precision Press [ 2022-08-01 ]
High-speed precision best-selling models with actual sales of more than 3000 units 1. It can correspond to a variety of production and processing methods Terminals, IC lead frames, motor cores, chains, washers, etc. processing 2. Four guide pillars and two plungers guide high-precision machining (220L, 220TL, 330L are 3 plunger types) 3. High rigidity thickened main frame 4. Adopt linear bearing to guide 5. Ensure excellent bottom dead center accuracy (Standard cold & hot thermostat device) 6. A variety of additional options are available   Dongguan Sichuang Precision Machinery Co., Ltd. is located in Dalingshan Town, Dongguan City, Guangdong Province. It is a professional agent for Yamada Punch from Japan.
Dongguan Si Chuang Precision, YAMADADOBBY high-speed punch [ 2022-07-05 ]
Dongguan Si Chuang Precision operates Yamada punch, YAMADADOBBY high-speed punch, KYORI punch, Japanese high-speed punch, YAMADA DOBBY and so on. In order to achieve the ultimate punching accuracy, our company is equipped with micron-precision machining equipment, and integrates the processing, assembly and design of our company for R&D and production. The company now has the world's high-speed high-speed punch, 2-micron precision intelligent punch, and provides automatic riveting production lines for motor cores and other machinery.
Ultra-high-speed servo punch [ 2022-01-20 ]
1. Compact design A punch press with the same production capacity as before, one-third smaller 2. Forming from one stamping good product 3000spm can also be stamped and formed at one time 3. Excellent operating performance Manual cranking is possible in standard mode Reduced setup time due to servo drive * 3000spm continuous processing, spm50 inch can be set instantaneously 4. The ultimate accuracy Flatness: 1μm "JIS Premium 12μm" Parallelism: 2um "JIS Premium 14um" Verticality: 0.4μm "JIS Premium 8μm" Apply for ALT-3 data 5. Environmentally friendly punch

ADD.:

Wangkeng Road, Matigang, Dalingshan, Dongguan City, Guangdong Province, China

FAX:

+86-769-82868446

分享

Time of issue:2021-06-30 15:01:23

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

Copyright© 2021  Dongguan Sichuang Precision Machinery Co., Ltd.  All rights reserved

粤ICP备2021090377号    Powered by www.300.cn

搜索
Search